[Previous][Next]
DATA LIST REFERENCE TABLE
Item No.Scan tool MB991958 displayCheck conditionsNormal conditions
1Received key data(ID)-Key ID for stored ignition key
2Received key data(button)-Switch display of transmitter
13Number of registered IMMOB.key-Number of stored ignition keys (Number of registered ignition keys that can start the engine)
21Air pressure, Tire 1--
22Air pressure, Tire 2
23Air pressure, Tire 3
24Air pressure, Tire 4
25*Air pressure, Tire 5
31Acceleration, Tire 1--
32Acceleration, Tire 2
33Acceleration, Tire 3
34Acceleration, Tire 4
35*Acceleration, Tire 5
36Threshold of PRS. warningThe tire pressure is within the specified value range.OFF
The tire pressure is not within the specified value range.ON
37Threshold of PRS. warning releaseThe tire pressure is within the specified value range.ON
The tire pressure is not within the specified value range.OFF
38Number of registered TPMS ID-Number of stored TPMS
39Ignition signal(CAN data)Ignition switch status information received from ETACS-ECU via CAN:ONON
Ignition switch status information received from ETACS-ECU via CAN:OFFOFF
40Ignition signal(Port input)Ignition switch: ONON
Ignition switch: OFFOFF
41VSSDrive the vehicleThe scan tool and the speedometer readings are approximately the same
50Registered ID reception, Tier1 Ignition switch: ONYes
Ignition switch: OFFNo
51Registered ID reception, Tier2 Ignition switch: ONYes
Ignition switch: OFFNo
52Registered ID reception, Tier3 Ignition switch: ONYes
Ignition switch: OFFNo
53Registered ID reception, Tier4 Ignition switch: ONYes
Ignition switch: OFFNo
54*Registered ID reception, Tier5--
61Air pressure, Tire1(not adjusted)--
62Air pressure, Tire2(not adjusted)
63Air pressure, Tire3(not adjusted)
64Air pressure, Tire4(not adjusted)
65*Air pressure, Tire5(not adjusted)
note* shows that it is displayed but not used.