[Previous][Next]
INSPECTION
 
 
LIFTGATE LOCK RELEASE HANDLE (LIFTGATE OPEN SWITCH) CHECK
 
<VEHICLES WITHOUT KOS>
Switch positionTerminal numberNormal value
Push (open)1 - 2 Continuity exists (2 Ω or less)
Release1 - 2 No continuity
 
<VEHICLES WITH KOS>
Switch positionTerminal numberNormal value
Push (open)1 - 2 Continuity exists (2 Ω or less)
Release1 - 2 No continuity
 
 
 
LIFTGATE LOCK RELEASE HANDLE (LIFTGATE LOCK SWITCH) CHECK <VEHICLES WITH KOS>
 
Switch positionTerminal numberNormal value
Push (lock)2 - 3 Continuity exists (2 Ω or less)
Release2 - 3 No continuity
 
 
 
LIFTGATE LOCK ACTUATOR CHECK
 
Lever positionBattery connectionLever operation
At the "SET" position
  • Connect terminal 2 to negative battery terminal.
  • Connect terminal 1 to positive battery terminal.
Lever moves from "SET" to "OPEN" position.
 
 
 
LIFTGATE LATCH SWITCH CHECK
 
Claw positionTerminal numberNormal value
Unlatch (ON)/ Half-latch (ON)1 - Ground Continuity exists (2 Ω or less)
Full-latch (OFF)1 - Ground No continuity