DTC C1754 Radar calibration not completed
OPERATION
The FCM/LDW/AHB-ECU memorizes the neutral position of its sensor.
DTC SET CONDITION
This DTC is set when the abnormality below is detected:
The FCM/LDW/AHB-ECU detects that the neutral position of its sensor is not learned yet.
PROBABLE CAUSES
Neutral position of the FCM/LDW/AHB-ECU sensor not learned
DIAGNOSIS
FCM/LDW/AHB-ECU sensor calibration.
Perform calibration of FCM/LDW/AHB-ECU sensor calibration (Refer to
).
Has the calibration succeeded?
This diagnosis is complete.
Identify why the calibration fails, and then calibrate the FCM/LDW/AHB-ECU sensor.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
).
This diagnosis is complete.
Identify why the calibration fails, and then calibrate the FCM/LDW/AHB-ECU sensor.