[Previous][Next]
REMOVAL AND INSTALLATION
 
 
cautionDo not apply lubricant (grease or silicon system sprayer etc.) to the switch and the switch installation section to avoid malfunction of the switch. In addition, do not use gloves which have lubricant (grease or silicon system sprayer etc.) on them.
Removal steps
1.Stoplight relay connector
2.Stoplight relay
3.Stoplight switch connector connection
4.Stoplight switch
5.Pedal clip
6.Pedal stopper
7.Snap pin
8.Pin assembly
9.Pedal pad
<<A>>10.Brake pedal assembly
 
 
REMOVAL SERVICE POINT
 
 
<<A>> BRAKE PEDAL ASSEMBLY REMOVAL
From the engine compartment side, remove the brake pedal assembly while pulling the brake booster.