[Previous][Next]
SELECTOR LEVER ASSEMBLY CONTINUITY CHECK
 
 
SWITCH CHECK
 
ItemSelector lever positionTerminal numberContinuity
P position detect switch <Vehicles with KOS>P4 - 6No continuity
Other than above4 - 6Continuity
P position detect switch <Vehicles without KOS>P5 - 6No continuity
Other than above5 - 6Continuity
Ds position switch <Vehicles without paddle shift>Ds, L8 - 9Continuity
Other than above8 - 9No continuity
 
 
 
KEY LOCK RELAY CHECK <VEHICLES WITHOUT KOS>
1. Shift the selector lever to P position.
2. Use a jumper wire to connect terminal No. 5 of the selector lever assembly connector to the battery (+) terminal, terminal No. 6 to the battery (-) terminal. Then apply battery positive voltage.
3. Check for continuity between the selector lever assembly connector terminals No. 4 and No. 5.
 
Jumper wireContinuity between terminals No. 4 and No. 5
ConnectYes (2 ohms or less)
DisconnectNo