STEP 1. Using scan tool MB991958, read the diagnostic trouble code (DTC).
caution | To prevent damage to scan tool MB991958, always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool MB991958. |
(1) Connect scan tool MB991958 to the data link connector.
(2) Turn the ignition switch to the "ON" position.
(3) Read the DTC.
(4) Turn the ignition switch to the "LOCK" (OFF) position.
Is DTC P0461 set?
Go to Step 2. Go to Step 4.
STEP 2. Check fuel gauge.
STEP 3. Check the trouble symptoms.
STEP 4. Check the fuel level sensor (sub).
STEP 5. Check the trouble symptoms.
STEP 6. Check the trouble symptoms.
- Check that the fuel gauge operates correctly.
Does the fuel gauge operates correctly?
The inspection is complete. Retry the troubleshooting.