REMOVAL AND INSTALLATION
MULTIVISION DISPLAY
Pre-removal operation
Removal of Instrument panel assembly center (Refer to GROUP 52A - Instrument Center Panel assembly
)
Post-installation operation
Installation of Instrument panel assembly center (Refer to GROUP 52A - Instrument Center Panel assembly
)
Removal Steps
1.
Multivision display/bracket (LH/RH)
2.
Bracket (LH/RH)
3.
Multivision display
GPS ANTENNA
Pre-removal operation
Removal of Multivision display assembly
Post-installation operation
Installation of Multivision display assembly
INSTALLATION SERVICE POINT
>>A<< MULTIVISION DISPLAY
The connectors, antenna and cables connected to the multivision display are shown in the figure.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)
)
