51-INSPECTION

INSPECTION

DOOR MIRROR ASSEMBLY OPERATION CHECK

Remove the door trim, and then connect the battery to the door mirror assembly connector to check that the door mirror operates.

Battery connection	Operation direction
Connect terminal 13 to the negative battery terminal. Connect terminal 4 to the positive battery terminal.	Up
Connect terminal 13 to the positive battery terminal. Connect terminal 4 to the negative battery terminal.	Down
Connect terminal 13 to the negative battery terminal. Connect terminal 12 to the positive battery terminal.	Right
Connect terminal 13 to the positive battery terminal. Connect terminal 12 to the negative battery terminal.	Left
Connect terminal 14 to the positive battery terminal. Connect terminal 5 to the negative battery terminal.	Retract
Connect terminal 14 to the negative battery terminal. Connect terminal 5 to the positive battery terminal.	Return

REMOTE CONTROLLED MIRROR SWITCH CONTINUITY CHECK

Switch position		Tester connection	Specified condition
Left side	Up	1 - 6, 9 - 11	Continuity (Less than 2 Ω)
	Down	1 - 11, 6 - 9
	Right	1 - 6, 9 - 10
	Left	1 - 10, 6 - 9
Right side	Up	1 - 6, 3 - 9
	Down	1 - 3, 6 - 9
	Right	1 - 6, 2 - 9
	Left	1 - 2, 6 - 9
Retract and return		1 - 4

HEATED DOOR MIRROR CHECK

caution

When relocating the car between locations with extremely different temperatures (warm and cold), leave the car in the location for a while to adapt to the temperature prior to checking it.

Check that the resistance value between the connector terminals is at the standard value.

Standard value: 7.2 ± 1.4 Ω at 25°C (77°F)