[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Pre-removal and Post-installation Operation
Windshield Washer Fluid Draining and Filling.
Windshield washer nozzle removal steps
Connection of windshield washer hose
1.Windshield washer nozzle assembly LH
2.Windshield washer nozzle assembly RH
Windshield washer hose removal steps
Splash shield (RH) mounting clips
3.Windshield washer joint A
4.Windshield washer hose A
5.Windshield washer joint B
6.Windshield washer hose B
7.Windshield washer clip
8.Windshield washer joint C
Engine room under cover front (Refer to )
Front bumper assembly (Refer to )
9.Windshield washer motor side hose
Windshield washer tank removal steps
Engine room under cover front (Refer to )
Splash shield (RH) mounting clips
Front bumper assembly (Refer to )
9.Windshield washer motor side hose
10.Rear window washer hose
Connection of windshield washer motor connector
11.Windshield washer tank assembly and windshield washer motor assembly
12.Windshield washer tank filler cap
13.Windshield washer tank filler hose A
14.Windshield washer tank filler hose B
15.Windshield washer grommet
16.Windshield washer motor
17.Windshield washer tank inlet gasket
18.Windshield washer tank fluid level sensor
19.Windshield washer tank
Windshield washer motor removal steps
Engine room under cover front (Refer to )
Front bumper assembly (Refer to )
9.Windshield washer motor side hose
10.Rear window washer hose
16.Windshield washer motor
17.Windshield washer tank inlet gasket