Inspection Procedure 3: Shock is experienced during N to D and/or N to R shifting operation.
SYMPTOMS
Deep shock is experienced when the selector lever is moved from the N to R range or from the N to D range.
PROBABLE CAUSES
Abnormal line pressure
Malfunction of TCM
Malfunction of CVT assembly
DIAGNOSTIC PROCEDURE
STEP 1. Engine idling speed check
Is the check result normal?
Go to Step 2
.
Refer to the "Engine troubleshooting."
STEP 2. Line pressure check
Carry out "hydraulic test" (Refer to
).
Is the check result normal?
Go to Step 3
.
Repair according to the hydraulic pressure test diagnosis table.
STEP 3. Retest the system.
Replace TCM.
Recheck the trouble symptom.
Does the malfunction take place again?
Replace the CVT assembly.
The inspection is complete.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Go to Step 2
.
Refer to the "Engine troubleshooting.").Go to Step 3.Repair according to the hydraulic pressure test diagnosis table.Replace the CVT assembly.The inspection is complete.