INSPECTION IGNITION SWITCH CONTINUITY CHECK 1.Remove the instrument under cover. (Refer to Group 52A - Instrument Panel). 2.Disconnect the wiring connector from the ignition switch and connect an ohmmeter to the switch side connector. 3.Operate the ignition switch and check the continuity.

KEY REMINDER SWITCH, KEY HOLE ILLUMINATION LIGHT CONTINUITY CHECK 1.Remove the instrument undercover (Refer to Group 52A - Instrument Panel). 2.Disconnect the wiring connector from the key reminder switch and connect an ohmmeter to the switch side connector. 3.Check the continuity when the ignition key is pulled out of and inserted into the steering lock cylinder.