[Previous][Next]
DTC B1194 BLOWER MOTOR CODING MISMATCH
 
 
 
 
DTC SET CONDITION
DTC No. B1194 will be set when there is abnormality in the coding data sent from the ETACS-ECU.
 
 
 
TROUBLESHOOTING HINTS
  • Malfunction of CAN bus line
  • ETACS coding data abnormality
  • Malfunction of the ETACS-ECU
  • Malfunction of the A/C controller assembly (A/C-ECU)
 
 
 
DIAGNOSIS
STEP 1. Using scan tool (M.U.T.-IIISE), diagnose CAN bus line.
Is the check result normal?
Go to Step 2.
Repair the CAN bus lines (Refer to GROUP 54C, Troubleshooting ).
 
STEP 2. ETACS-ECU coding data check
Using the M.U.T.-IIISE, check if there is the A/C Fan Control Type abnormality to the coding data stored in the ETACS-ECU.
OK: "PWM" is displayed.
Is the check result normal?
Go to Step 3.
Replace the ETACS-ECU.
 
STEP 3. Using scan tool (M.U.T.-IIISE), check whether the DTC is set.
Recheck if the DTC is set.
(1) Erase the DTC.
(2) Electric motor switch: OFF to ON
(3) Check if the DTC is set.
Is the DTC set?
Replace the A/C controller assembly (A/C-ECU).
The trouble can be an intermittent malfunction (Refer to GROUP 00, How to Cope with Intermittent Malfunction ).