| 17 | Engine speed | - | Displays correct engine speed. |
| 19 | Ambient temperature sensor | - | Ambient temperature is the same as scan tool (M.U.T.-IIISE) displayed temperature |
| 20 | Air thermo sensor | - | Evaporator outlet temperature is the same as scan tool (M.U.T.-IIISE) displayed temperature. |
| 21 | Interior temperature sensor | - | Interior temperature is the same as scan tool (M.U.T.-IIISE) displayed temperature |
| 24 | ECT sensor | - | Engine coolant temperature is the same as scan tool (M.U.T.-IIISE) displayed temperature. |
| 26 | Vehicle speed | - | Displays vehicle speed. |
| 27 | A/C compressor drive request | Compressor activation request: ON | ON |
| Compressor activation request: OFF | OFF |
| 28 | Air conditioning switch | Air conditioning switch ON | ON |
| Air conditioning switch OFF | OFF |
| 29 | Refrigerant leak (Level 20%) | - | Normal |
| 45 | In/out select damp poten (target) | Displays outside/inside air selection damper target position. | Displays outside/inside air selection damper target position. |
| 46 | In/out select damp potentiometer | - | Displays outside/inside air selection damper position. |
| 55 | Air outlet c/o potentiometer | - | Displays air outlet changeover damper position. |
| 56 | Air outlet c/o potentio. (Target) | - | Displays air outlet changeover damper target position. |
| 57 | Refrigerant leak (Low pressure) | - | Normal |
| 60 | Rear defogger switch | Rear window defogger switch ON | ON |
| Rear window defogger switch OFF | OFF |
| 61 | Pressure sensor | - | Displays refrigerant pressure. |
| 67 | Photo sensor | Not used | Value of solar radiation |
| 68 | Front blower fan | - | Displays blower motor condition. |
| 69 | Front blower fan (Target) | - | Displays blower motor target value. |
| 74 | Condenser fan | - | Displays condenser fan running condition. |
| 92 | Wiper operation flag | - | ON when the wiper is operated. |
| 93 | IG/Electric motor SW pos. info. | - | Electric motor switch status |
| 94 | Power source voltage | - | Displays power supply voltage. |
| 95 | IOD fuse equipment flag | - | IOD fuse status |
| 97 | Alternator use rate | Not used | Alternator Duty Cycle |
| 100 | System operation time | - | System operation time |
| 101 | Engine work time | - | Engine work time |
| 102 | Battery cooling time | - | Battery cooling time |
| 103 | IG SW/Electric motor SW ON time | - | IG ON time |
| 104 | Solenoid valve operation counter | - | Solenoid valve operation frequency |
| 105 | Compressor high speed drive time | - | Compressor high speed drive time |
| 106 | Compressor high PRS.drive time | - | Compressor high PRS. drive time |
| 107 | Compressor drive time | - | Compressor drive time |
| 108 | High pressure cut times | - | Displays the high pressure cut times. |
| 109 | Maximum pressure | - | Displays the refrigerant pressure. |
| 110 | High water TEMP. cut counter | - | High water TEMP. cut frequency |
| 111 | High water temperature time | - | High water temperature time |
| 112 | ELC.water pump drive time | - | ELC.water pump drive time |
| 118 | MAX coolant temperature | - | MAX coolant temperature |
| 119 | Fan HI driving time | - | Fan HI driving time |
| 120 | Fan M2 driving time | - | Fan M2 driving time |
| 121 | Fan M1 driving time | - | Fan M1 driving time |
| 122 | Fan LO driving time | - | Fan LO driving time |
| 151 | Dr air mix potentiometer | - | Displays the air mix damper position (driver's side). |
| 152 | As air mix potentiometer | - | Displays the air mix damper position (front passenger's side). |
| 153 | High pressure fail flag | High pressure fail flag ON | ON |
| High pressure fail flag OFF | OFF |
| 154 | Dr temperature setting | - | Displays air conditioning set temperature (driver's side). |
| 155 | As temperature setting | - | Displays air conditioning set temperature (front passenger's side). |
| 156 | Eco Mode | ECO mode | ECO |
| Normal mode | Comfort |
| 160 | Low pressure fail flag | Low pressure fail flag ON | ON |
| Low pressure fail flag OFF | OFF |
| 172 | BATT.cooling air thermo sensor | - | Displays the temperature downstream of the evaporator in the main drive lithium-ion battery. |
| 173 | High voltage battery voltage | - | High voltage battery voltage |
| 174 | High voltage battery current | - | High voltage battery current |
| 175 | Supply power for A/C | - | Displays the electric power consumption available for operating the air conditioning |
| 176 | A/C inverter switch | AC inverter main switch: ON | ON |
| AC inverter main switch: OFF | OFF |
| 180 | Engine start request | - | Displays the engine start request signal |
| 181 | Solenoid valve output | Solenoid valve: ON (interior cooling: ON) | ON |
| Solenoid valve: OFF (interior cooling: OFF) | OFF |
| 182 | Compressor power | - | Displays an actual electric power consumption for the compressor. |
| 183 | Compressor speed | - | Displays the compressor actual speed. |
| 184 | Compressor drive flag (IG cycle) | Compressor drive flag ON | ON |
| Compressor drive flag OFF | OFF |
| 185 | Compressor voltage fail | Compressor voltage fail ON | ON |
| Compressor voltage fail OFF | OFF |
| 186 | Compressor power fail | Compressor power fail ON | ON |
| Compressor power fail OFF | OFF |
| 187 | Compressor sensor fail | Compressor sensor fail ON | ON |
| Compressor sensor fail OFF | OFF |
| 188 | Compressor over current | Compressor detects over current | ON |
| Compressor does not detect over current | OFF |
| 189 | Compressor stop eternity | Compressor stops eternity | ON |
| Compressor does not stop eternity | OFF |
| 190 | Compressor heat protection | Compressor sets heat protection | ON |
| Compressor does not set heat protection | OFF |
| 191 | Compressor controller fail | Compressor controller fail ON | ON |
| Compressor controller fail OFF | OFF |
| 192 | Compressor drive status | - | Compressor drive status |
| 193 | Electric water pump signal | - | Displays the heater water pump drive status. |
| 196 | ELC.water pump drive his.flag | The heater water pump is not driven. | OFF |
| The system has detected a malfunction in the heater water pump. | Fail |
| The heater water pump is normal. | ON |
| 198 | BATT.cooling drive history flag | The ECU has not determined whether the evaporator is normal or not. | OFF |
| The ECU has determined whether the evaporator is normal or not. | ON |
| 199 | Compressor drive history flag | The ECU has not determined whether the compressor is normal or not. | OFF |
| The ECU has determined whether the compressor is normal or not. | ON |
| 200 | Battery cooling request signal | No request signal is available. | OFF |
| A request signal is available. | ON |
| 201 | Pre A/C signal | Pre A/C: ON | ON |
| Pre A/C: OFF | OFF |
| 202 | Crash down signal | Crash down: ON | ON |
| Crash down: OFF | OFF |
| 203 | Shut down signal | High voltage cannot be supplied to the air conditioning/heater. | OFF |
| High voltage can be supplied to the air conditioning/heater. | ON |
| 204 | High voltage ready signal | High voltage system is ready | ON |
| High voltage system is not ready | OFF |
| 205 | Heated Windscreen test mode flag | Heated windshield test mode: OFF | OFF |
| Heated windshield test mode: ON | ON |
| 206 | Heated Windscreen equipment | Vehicles without heated windshield | Not present |
| Vehicles with heated windshield | Present |
| 207 | Blower motor high temperature protection | Active | ON |
| Inactive | OFF |
| 208 | Blower motor overcurrent protection | Active | ON |
| Inactive | OFF |
| 209 | Blower motor duty ratio | - | 0-100% |
| 210 | Blower motor duty ratio (Target) | - | 0-100% |