DTC SET CONDITIONS
This code is set when one of the following conditions is met.
- When B1102 A/C compressor inverter error (overcurrent) occurs 10 times or more
- When B1117 A/C compressor inverter error (controller error) occurs 2 times or more
- When B1118 A/C compressor inverter error (temperature sensor error) occurs 2 times or more
TROUBLESHOOTING HINT
Malfunction of A/C compressor assembly
DIAGNOSIS
1. Using scan tool (M.U.T.-IIISE), check whether the DTC is set again.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)