[Previous][Next]
DTC U1195 Coding not completed
 
 
caution
  • If DTC U1195 is set, diagnose the CAN bus lines.
  • When replacing the ECU, always check that the communication circuit is normal.
 
 
DTC SET CONDITION
If the vehicle information data is not registered to the ETACS-ECU, the heater controller assembly (A/C-ECU) set diagnostic DTC U1195.
 
 
TROUBLESHOOTING HINTS
  • Malfunction of CAN bus line
  • Malfunction of heater controller assembly (A/C-ECU)
  • Malfunction of the ETACS-ECU
 
 
DIAGNOSIS
1. Using scan tool (M.U.T.-IIISE), check whether the DTC is set again.