[Previous][Next]
DTC C2335 Vehicle speed not determined
 
 
cautionBefore replacing the ECU, ensure that the power supply circuit, the ground circuit and the communication circuit are normal.
 
 
OPERATION
The BSW-ECU (slave) communicates with the ASC-ECU via the gateway-ECU and the BSW-ECU (master) through CAN bus lines.
 
 
CHECK CONDITION
Electric motor switch is in the ON position.
 
 
DIAGNOSTIC FUNCTION AND TROUBLE JUDGMENT
When the BSW-ECU (slave) receives any invalid vehicle speed signal or any implausible signal from the ASC-ECU, the ECU sets DTC C2335.
 
 
TROUBLESHOOTING HINTS
  • The ASC system fails
  • Malfunction of BSW-ECU (master/slave)
 
 
DIAGNOSIS
1. Using scan tool (M.U.T.-IIISE), read the BSW-ECU (master) DTC [Check if DTC C2335 is set in the BSW-ECU (master)].
2. Using scan tool (M.U.T.-IIISE), read the BSW-ECU (slave) DTC again.
3. Using scan tool (M.U.T.-IIISE), read the BSW-ECU (slave) DTC again.