DTC C2335 Vehicle speed not determined
caution
Before replacing the ECU, ensure that the power supply circuit, the ground circuit and the communication circuit are normal.
OPERATION
The BSW-ECU (master) communicates with the ASC-ECU via the gateway-ECU and CAN bus lines.
CHECK CONDITION
Electric motor switch is in the ON position.
DIAGNOSTIC FUNCTION AND TROUBLE JUDGMENT
When the BSW-ECU (master) receives any invalid vehicle speed signal or any implausible signal from the ASC-ECU, the ECU sets DTC C2335.
TROUBLESHOOTING HINTS
The ASC system fails
Malfunction of BSW-ECU (master)
DIAGNOSIS
1.
Using scan tool (M.U.T.-IIISE), read the other system DTC (Check if DTC is set in the ASC-ECU).
2.
Using scan tool (M.U.T.-IIISE), read the BSW-ECU (master) DTC again.
3.
Using scan tool (M.U.T.-IIISE), read the BSW-ECU (master) DTC again.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)