[Previous][Next]
DTC C2329 Radar PWR.supply VOLT(Above 16V)
 
 
cautionBefore replacing the ECU, ensure that the power supply circuit, the ground circuit and the communication circuit are normal.
 
 
OPERATION
BSW-ECU (master) power supply is provided from the 12V starter battery via ETACS-ECU.
 
 
CHECK CONDITION
Electric motor switch is in the ON position.
 
 
DIAGNOSTIC FUNCTION AND TROUBLE JUDGMENT
When system voltage remains 16 volts or more, the BSW-ECU (master) will set DTC C2329.
 
 
TROUBLESHOOTING HINTS
  • 12V starter battery failure
  • Malfunction of charging system
  • Malfunction of BSW-ECU (master)
 
 
DIAGNOSIS
1. Using scan tool (M.U.T.-IIISE), read the PHEV-ECU DTC (Check whether a DTC, which is associated with the on-board charger/DC-DC converter, is set in the PHEV-ECU. (Refer to GROUP 54Da - PHEV-ECU, Diagnostic Trouble Code Chart ).
2. Using scan tool (M.U.T.-IIISE), read the BSW-ECU (master) DTC again.