[Previous][Next]
Inspection Procedure 4: FAULT Indicator is Lit.
 
 
 
 
COMMENTS ON TROUBLE SYMPTOM
When detecting the internal circuit abnormalities, the charging circuit interrupting device should light the FAULT indicator.
 
 
 
PROBABLE CAUSE
  • The charging cable is failed.
 
 
 
DIAGNOSIS
Required Special Tools
  • MB991223: Wiring harness set
  • MB992006: Extra fine probe
STEP 1. Check the trouble symptom.
Does the trouble symptom persist?
Replace the charging cable.
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).