[Previous][Next]
15. Front JB assembly, front JB bus bars (D, E, F, N and P), electric current sensor, contactor and resistor removal and installation
 
 
 
 
Front JB assembly, front JB bus bars (D, E, F, N and P), electric current sensor, contactor and resistor removal
1. Remove the bolts as shown to remove the front JB assembly.
2. Remove the bolts as shown to remove the front JB bus bars (D, E, F, N and P).
3. Remove the electric current sensor.
4. Remove the bolts as shown to remove the contactor.
5. Remove the bolts as shown to remove the resistor.
 
 
Front plate removal
1. Remove the bolts as shown to remove the plate A and front plate.
2. Remove the O-ring.
 
 
 
Front plate installation
1. Install the O-ring.
2. Install the plate A, front plate and tighten the bolts as shown to the specified torque.
 
 
 
Front JB assembly, front JB bus bars (D, E, F, N and P), electric current sensor, contactor and resistor installation
1. Install the resistor and tighten the bolts as shown to the specified torque.
2. Install the contactor and tighten the bolts as shown to the specified torque.
3. Install the electric current sensor.
4. Install the front JB bus bars (D, E, F, N and P), and tighten the bolts as shown to the specified torque.
5. Install the front JB assembly and tighten the bolts as shown to the specified torque.