[Previous][Next]
19. Battery module assembly removal and installation
 
 
 
 
Battery module assembly removal
1. Remove the bolts as shown to remove the battery module assembly.
2. Remove the pads.
 
 
 
Battery module assembly installation
1.
caution
  • The application surface should be free of oil, grease or foreign materials.
  • Align the pad at A in the figure with the positioning line (front) to install.
Install the pads.
2. Install the O-ring.
3. Install the plate B, rear plate and tighten the bolts as shown to the specified torque.
4. Install the O-ring.
5. Install the plate A, front plate and tighten the bolts as shown to the specified torque.
6. Install the battery module assembly and tighten the bolts as shown to the specified torque.