[Previous][Next]
17. Evaporator (for cooling the main drive lithium-ion battery) removal and installation
 
 
 
 
Evaporator (for cooling the main drive lithium-ion battery) removal
1. Remove the bolts as shown to remove the evaporator (for cooling the main drive lithium-ion battery).
2. Remove the retainer assembly.
3. Remove the O-ring.
 
 
 
Evaporator (for cooling the main drive lithium-ion battery) installation
1.
caution
  • The application surface should be free of oil, grease or foreign materials.
  • Align the pad in the figure with the edge face of retainer.
Install the pad.
2. Install the retainer assembly.
3. Install the O-ring.
4. Install the evaporator (for cooling the main drive lithium-ion battery) and tighten the bolts as shown to the specified torque.