2. Bus bars (F, G) removal and installation
Bus bars (F, G) removal
1.
Remove the terminal cover.
2.
Remove the nuts to remove the bus bars (F, G).
3.
Install the terminal cover as shown.
Bus bars (F, G) installation
1.
Remove the terminal cover.
2.
Install the bus bars (F, G) and tighten the nuts as shown to the specified torque.
3.
Install the terminal cover as shown.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)
)