| caution | Before measuring the insulation resistance, set the range of the electric insulation tester (special tool: MB992355) to 500 V. If a range exceeding 500 V is used for the measurement, the part may be damaged. |
1. Use the electric insulation tester (special tool: MB992355) and set it to the 500V range.
2. Measure the insulation resistance between the front motor high-voltage terminal and body ground shown
Standard value: 10 MΩ or more
3. If out of the standard value, replace the front motor.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)