[Previous][Next]
DISASSEMBLY AND REASSEMBLY
 
 
cautionDo not disassemble any rear motor components other than those described in this manual.
Disassembly steps
1.Service lid
<<A>>>>A<<2.Rear motor cable
3.O-ring
4.Wiring harness bracket
5.Rear motor mounting rear bracket assembly (LH)
6.Rear motor mounting front bracket assembly (FR)
7.Rear motor mounting rear bracket assembly (RH)
8.Rear motor assembly
9.O-ring
10.Rear transaxle assembly
 
 
DISASSEMBLY SERVICE POINT
 
 
<<A>> REAR MOTOR CABLE DISCONNECTION
1. Remove the inner cable mounting bolts (3 locations).
2. Remove the outer cable mounting bolts (2 locations).
3. Pull out the cable from the rear motor.
 
 
 
 
ASSEMBLY SERVICE POINT
 
 
>>A<< REAR MOTOR CABLE CONNECTION
1. Connect the cable with the rear motor.
2. Install the outer cable mounting bolts and inner cable mounting bolts in this order and tighten them to the specified torque.
Tightening torque: 7.0 ± 3.0 N·m (62 ± 26 in-lb)