When servicing the high-voltage system parts, be sure to wear the specified protection equipment and disconnect the service plug to interrupt the high-voltage supply (Refer to ).
caution
After adjusting the steering angle, always perform calibration to make ASC-ECU learn the neutral position of the steering wheel sensor (Refer to GROUP 35C, On-vehicle Service - Steering Wheel Sensor Calibration ).
When replacing the front motor assembly, check the oil filter of the EV cooling system (Refer to GROUP 14B - On-vehicle Service <Oil Cooling System>, Oil Change ). If the oil filter is contaminated with foreign material or broken, replace the oil filter together with the front motor assembly.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
).)