[Previous][Next]
ACTUATOR TEST TABLE
 
 
Generator control unit (GCU)
Item No.Scan tool (M.U.T.-III) displayCheck itemDriven component
1Oil pump
cautionWhen ambient temperature is -15°C (5°F) or less, the oil pump may not operate stably. Execute the actuator test only when the temperature is above -15°C (5°F).
  • Turn off the power supply mode of the electric motor switch.
  • Vehicle speed: 0km/h
  • The oil pump-related diagnostic trouble codes (P105C, P105B or P10AE) are not a current fault.
  • When all of the check conditions are met, the oil pump is not activated.
  • Activates the oil pump at the ratio of 26%.