DIAGNOSIS
Using scan tool (M.U.T.-IIISE), check whether the DTC is set again.
1. Erase the DTC.
2. Turn off the power supply mode of the electric motor switch.
3. Turn on the power supply mode of the electric motor switch.
4. Check the DTC.
5. If the DTC is set again, replace the PHEV-ECU (Refer to 
). 6. If the DTC is not set again, the trouble can be an intermittent malfunction (Refer to GROUP 00, How to Cope with Intermittent Malfunction ). ![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)