| 2 | 12V DCDC shutdown | - Ready indicator is illuminated
- Selector lever position indicator: N
- Vehicle speed: 0 km/h (0 mph)
| When all the check conditions are met, DC-DC converter drives. When the actuator test is started, the DC-DC converter drive stops. | Shutdown |
| 3 | Radiator fan relay 1 actuate | - Power supply mode of electric motor switch: ON
- Vehicle speed: 0 km/h (0 mph)
| When the actuator test is activated, the radiator fan relay is turned on. This causes the radiator fan and the condenser fan to run at a low speed. | ON/OFF |
| 4 | Radiator fan relay 2 actuate | - Power supply mode of electric motor switch: ON
- Vehicle speed: 0 km/h (0 mph)
| When the actuator test is activated, the condenser fan relay and the fan control relay are turned on. This causes the condenser fan to run at a high speed. | ON/OFF |
| 7 | Back light relay actuate | - Power supply mode of electric motor switch: ON
- Selector lever position indicator: B, N, D, or P
- Vehicle speed: 0 km/h (0 mph)
| When all the check conditions are met, the back-up light relay is not driving. When the actuator test is started, back-up light relay drives. | ON/OFF |
| 8 | Water pump actuate | - Ready indicator is illuminated
- Vehicle speed: 0 km/h (0 mph)
- The DTC (P0C73 or P0A05) related to the electric water pump is not the current malfunction.
| When the actuator test is started, electric water pump drives. | ON/OFF |
| 9 | Water pump power supply relay | - Power supply mode of electric motor switch: ON
- Vehicle speed: 0 km/h (0 mph)
| When all the check conditions are met, the electric water pump relay is driving. When the actuator test is terminated, drive of the electric water pump power supply relay stops. | ON/OFF |
| 19 | Buzzer actuate | Power supply mode of electric motor switch: ON | When the actuator test is started, the brake warning tone alarm sounds for 3 seconds. | ON/OFF |
| 20 | Brake warning light actuate | Power supply mode of electric motor switch: ON | When the actuator test is started, the brake warning tone alarm sounds for 5 seconds. | ON/OFF |
| 21 | Stop light actuate | - Power supply mode of electric motor switch: ON
- Vehicle speed: 0 km/h (0 mph)
| When the actuator test is started, the stop light illuminates. | ON/OFF |
| 22 | Charge&Discharge connector relay | - Power supply mode of electric motor switch: ON
- Vehicle speed: 0 km/h
- Not at the charging mode
| When all the inspection conditions are satisfied, the V2H relay is inactivated. If turning ON the actuator test, the V2H relay is activated. | ON/OFF |
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)