[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Pre-removal and post-installation operation
  • Multivision Display Assembly Removal and Installation (Refer to GROUP 54A - Smartphone Link Display Audio ).
  • Combination Meter Bezel Removal and Installation (Refer to GROUP 54A - Combination Meter ).
Removal steps
<<A>>1.Gateway-ECU
2.Gateway-ECU bracket
 
 
REMOVAL SERVICE POINT
 
 
<<A>> GATEWAY-ECU REMOVAL
Remove the meter bezel. Then disengage the tabs on the gateway-ECU and its bracket through the meter bezel opening to separate the ECU from the bracket. Reach through the opposite side of the opening to pull out the ECU.