[Previous][Next]
REMOVAL AND INSTALLATION
cautionWhen the EV remote-ECU is replaced, the settings for the wireless LAN device must be made again. Note that you should issue the supplied registration card to your customer.
Pre-removal operation
  • Removal of quarter trim lower (LH) (Refer to GROUP 52A - Interior trim )
  • Removal of quarter trim upper (LH) (Refer to GROUP 52A - Interior trim )
Post-installation operation
  • Installation of quarter trim upper (LH) (Refer to GROUP 52A - Interior trim )
  • Installation of quarter trim lower (LH) (Refer to GROUP 52A - Interior trim )
Removal steps
1.Connector
2.EV remote-ECU