[Previous][Next]
TAIL LIGHT REMOVAL AND INSTALLATION
 
 
Pre-removal and Post-installation Operation
Liftgate Trim Removal and Installation (Refer to GROUP 52A - Liftgate Trim ).
Removal Steps
<<A>>>>A<<1.Tail light assembly
2.Clip
3.Grommet
4.Nut
 
 
REMOVAL SERVICE POINT
 
 
<<A>> TAIL LIGHT ASSEMBLY REMOVAL
Disengage the clip by inserting the special tool Ornament remover (MB990784) as shown. Then remove the tail light assembly.
 
 
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< TAIL LIGHT ASSEMBLY INSTALLATION
cautionWhen installing the tail light assembly, roll up the weatherstrip and secure it by a tape as shown to avoid trapping it.