[Previous][Next]
DTC B254E: Camera ECU output pictures fault
 
 
 
 
DTC SET CONDITION
When the camera-ECU detects an unfeasible image signal for 5 seconds, DTC No. B254E will be set.
 
 
TROUBLESHOOTING HINTS
  • The camera-ECU may be defective
 
 
DIAGNOSIS
1. Check the multivision display operation (Check if the multivision display normally and the sound is output).
2. Check of short to power supply, short to ground, and open circuit in VOUT line between camera-ECU connector and multivision display connector.
3. Recheck the DTC (Check again if the DTC is set in the camera-ECU).