Inspection Procedure 3: Any of the camera images is blue.
COMMENT ON TROUBLE SYMPTOM
If any of the cameras does not send an image input signal to the camera-ECU, the relevant segment will be blue in the camera image screen. In addition, if any image input signal fails in the camera-ECU, a DTC will be set.
TROUBLESHOOTING HINTS
Any camera may be defective
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector
DIAGNOSIS
1. Using scan tool (M.U.T.-IIISE), check the DTC in the camera-ECU.
2. Check of open circuit in VNV, VRV, VSV or VYV line between camera connector and camera-ECU connector.