[Previous][Next]
DTC B2548: Calibration not completed
 
 
 
 
DTC SET CONDITION
When the camera-ECU has not been calibrated, DTC No. B2548 will be set.
note
  • "!" mark is displayed against the camera, which has not been calibrated yet, when DTC No. B2548 is set.
  • DTC No. B2548 will be erased automatically after learned values are written to the camera-ECU successfully or a relevant camera has been calibrated.
 
 
TROUBLESHOOTING HINTS
  • The camera-ECU not calibrated
  • The camera-ECU may be defective
 
 
DIAGNOSIS
Recheck the DTC (Check again if the DTC is set in the camera-ECU).