[Previous][Next]
DTC U1195: Coding not completed
 
 
cautionIf DTC No. U1195 is set, be sure to diagnose the CAN bus line.
 
 
DTC SET CONDITION
If the vehicle information data is not registered to the camera-ECU, the camera-ECU sets DTC No. U1195.
note"!" mark is displayed on the vehicle icon when DTC No. U1195 is set.
 
 
TROUBLESHOOTING HINTS
  • Variant coding not performed
  • The ETACS-ECU may be defective
  • The camera-ECU may be defective
  • The CAN bus may be defective
 
 
DIAGNOSIS
1. Using scan tool (M.U.T.-IIISE), diagnose the CAN bus line.
2. Using scan tool (M.U.T.-IIISE), read the ETACS DTC.
3. Recheck the DTC (Check again if the DTC is set in the camera-ECU).