[Previous][Next]
DTC U1195: Coding not completed
 
 
caution
  • If DTC No. U1195 is set, diagnose the CAN bus lines.
  • Before replacing the combination meter, ensure that the power supply circuit, the ground circuit and the communication circuit are normal.
 
 
DIAGNOSTIC FUNCTION
If the vehicle information data is not registered to the combination meter, the combination meter sets DTC No. U1195.
 
 
DTC SET CONDITIONS
With the global coding counter value "0," if all the global coding data (vehicle information) are not stored, the combination meter determines that a problem has occurred.
 
 
TROUBLESHOOTING HINTS
  • The CAN bus line may be defective
  • The combination meter may be defective
  • The ETACS-ECU may be defective
 
 
DIAGNOSIS
1. Using scan tool (M.U.T.-IIISE), diagnose the CAN bus line.
2. Using scan tool (M.U.T.-IIISE), read the other system DTC.
3. Check whether the DTC is set again.