[Previous][Next]
Inspection Procedure 9: The multi-information display screen cannot be changed with the operation of the meter information switch.
cautionBefore replacing the combination meter, be sure to check that the power supply circuit, ground circuit, and communication circuit are normal.
 
 
 
 
TECHNICAL DESCRIPTION (COMMENT)
When the signal from the meter information switch is received, the combination meter switches the multi-information display screen. If the multi-information display screen does not switch normally, the meter information switch, wiring harness, connector(s), or combination meter may have a problem.
 
 
TROUBLESHOOTING HINTS
  • The meter information switch may be defective
  • The combination meter may be defective
  • The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector
 
 
DIAGNOSIS
1. Using scan tool (M.U.T.-IIISE), read the DTC. (Check if DTC No. B2464 is set in the combination meter.)
2. Using scan tool (M.U.T.-IIISE), perform Special Function [Item 3: LCD (AUTO)].
3. Retest the system.