[Previous][Next]
ACTUATOR TEST TABLE
Item No.Item nameTest itemDriven content
1*1SpeedometerPointer setting (-)Value that is set with scan tool (M.U.T.-IIISE) is shown on the combination meter.
2*2TachometerPointer setting (r/min)
3Fuel gaugeStatus setting (ohm)
5Meter illuminationStatus setting (%)
7Energy usage indicator(EV)Status setting (%)
8Energy usage indicator(Engine)Status setting (%)
note
  • *1: Depending on the main scale of the speedometer, the unit that can be tested changes. Unit is displayed as "-" on the scan tool (M.U.T.-IIISE) screen.
  • Ignore the item marked by *2.