54A-DATA LIST REFERENCE TABLE<Vehicles with lighting control sensor>

DATA LIST REFERENCE TABLE

Item No.	Scan tool (M.U.T.-IIISE) display	Condition	Normal condition
7001	RLS IG1	When the electric motor switch is turned to the ACC position.	OFF
7001	RLS IG1	When the electric motor switch is turned to the ON or START position.	ON
7002	RLS Light sensor sensitivity	When the customize value of the lighting control sensor sensitivity is set to level 1 (quick).	Level 1 bright
		When the customize value of the lighting control sensor sensitivity is set to level 2 (slightly quick).	Level 2 bright
		When the customize value of the lighting control sensor sensitivity is set to level 3 (normal).	Level 3
		When the customize value of the lighting control sensor sensitivity is set to level 4 (slightly slow).	Level 4 dark
		When the customize value of the lighting control sensor sensitivity is set to level 5 (slow).	Level 5 dark
7004	RLS Radio ACC	When the electric motor switch is turned to the START position.	OFF
7004	RLS Radio ACC	When the electric motor switch is turned to the ACC or ON position.	ON
7007	RLS Vehicle speed	Perform a test run of the vehicle.	The values displayed on the speedometer and scan tool (M.U.T.-IIISE) are almost the same.
7009	RLS Low beam "ON" request	When the area around the lighting control sensor is bright.	OFF
7009	RLS Low beam "ON" request	When the area around the lighting control sensor is dark.	ON
7010	RLS judgment illuminance output	When the area around the lighting control sensor has become bright from dark	The value displayed on the scan tool (M.U.T.-IIISE) becomes large.
7010	RLS judgment illuminance output	When the area around the lighting control sensor has become dark from bright.	The value displayed on the scan tool (M.U.T.-IIISE) becomes small.
7011	RLS Tail light "ON" request	When the area around the lighting control sensor is bright.	OFF
7011	RLS Tail light "ON" request	When the area around the lighting control sensor is dark.	ON
7012	RLS Tunnel detect output	When the area around the lighting control sensor is bright.	OFF
7012	RLS Tunnel detect output	When the area around the lighting control sensor is dark.	ON
7014	RLS Specification	-	EU
7015	RLS ECU Diagnostic version	-	-
7016	RLS ECU Hardware version	-	-
7017	RLS ECU Software version	-	-
7018	RLS ECU Part number	-	-
7019	RLS ECU Serial number	-	-