REMOVAL AND INSTALLATION
Pre-removal Operation
Front Bumper Assembly Removal (Refer to GROUP 51- Front Bumper Assembly
).
Front Bumper Reinforcement A Removal (Refer to GROUP 42A - Loose panel
).
Post-installation Operation
Front Bumper Reinforcement A Installation (Refer to GROUP 42A - Loose panel
).
Front Bumper Assembly Installation (Refer to GROUP 51 - Front Bumper Assembly
).
Headlight Aiming Adjustment (Refer to
).
Removal Steps
>>A<<
1.
Headlight assembly
2.
Grommet
INSTALLATION SERVICE POINT
>>A<< HEADLIGHT ASSEMBLY INSTALLATION
Tighten the mounting screw and bolts to the specified torque in the order shown.
Tightening torque:
Screw (1): 1.5 ± 0.3 N·m (13 ± 2 in-lb)
Bolt (2 to 5): 4.5 ± 1.5 N·m (40 ± 13 in-lb)
).).).![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)