[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Pre-removal and Post-installation Operation
  • Rear Combination Light Assembly Removal and Installation (Refer to GROUP 54A, Rear Combination Light .)
  • Splash Shield Rear (rear bumper side) Removal and Installation (Refer to GROUP 42A, Splash Shield .)
  • Damper Removal and Installation (Refer to GROUP 42A, Liftgate <Vehicles without power liftgate> or <Vehicles with power liftgate>.)
  • Rear End Wiring Harness and Rear Bumper Wiring Harness Combination
Removal steps
1.Clip
>>A<<2.Rear bumper assembly
3.Rear bumper face support bracket
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< REAR BUMPER ASSEMBLY INSTALLATION <VEHICLES WITH BLIND SPOT WARNING>
caution
  • Do not apply any sticker, paint or putty to the radar electric wave penetration area (shaded portion). However, only for Mitsubishi motors genuine color, paint can be repaired.
  • Avoid any shocks or scratches.
The electric wave penetration areas are symmetrical on left and right.