[Previous][Next]
DTC U0245: NAVI/DISP. AUDIO CAN timeout
 
 
caution
  • If DTC U0245 is set, be sure to diagnose the CAN bus line.
  • When replacing the ECU, always check that the communication circuit is normal.
 
 
DIAGNOSTIC FUNCTION
If no signal from multivision display can be received, OSS-ECU stores DTC U0245.
 
 
DTC SET CONDITION
Check Conditions
  • When all the following conditions are met.
    1. Electric motor switch: ON
    2. ETACS-ECU system voltage is at 10 to 16 V.
Judgment Criterion
  • After the following condition is met, 2,500 ms or more have elapsed.
    1. CAN signal from multivision display cannot be received.
 
 
TROUBLESHOOTING HINTS
  • Malfunction of the CAN bus line
  • Multivision display malfunction
  • Malfunction of multivision display power supply circuit
  • Error in option coding setting of ETACS-ECU (replacement with the navigation unit not compatible with CAN communication)
  • Malfunction of OSS-ECU
 
 
DIAGNOSIS
1. Using scan tool (M.U.T.-IIISE), diagnose the CAN bus line.
2. Check of ETACS-ECU option coding
3. ETACS-ECU diagnostic trouble code check
4. OSS-ECU diagnostic trouble code recheck