[Previous][Next]
DTC B1140: KOS authentification error
 
 
 
 
DIAGNOSTIC FUNCTION
If any abnormal data is received from KOS-ECU as a result of the certification communication with KOS-ECU, OSS-ECU stores DTC B1140, and displays the immobilizer certification system inspection warning screen to the multi information display of the combination meter.
 
 
DTC SET CONDITION
Check Conditions
  • At KOS-ECU certification (at transition of power supply mode from OFF to ACC)
Judgment Criterion
  • As a result of the certification communication with KOS-ECU, OSS-ECU receives the abnormal data from KOS-ECU.
 
 
TROUBLESHOOTING HINTS
  • KOS-ECU malfunction (KOS-ECU has been interchanged between two vehicles, or various registrations are not complete after KOS-ECU replacement)
  • Malfunction of the CAN bus line
  • Malfunction of OSS-ECU
 
 
DIAGNOSIS
1. Using scan tool (M.U.T.-IIISE), diagnose the CAN bus line. [after turning the forced power supply output to "IG-ON" using the scan tool (M.U.T.-IIISE)]
2. KOS-ECU diagnostic trouble code check [after turning the forced power supply output to "IG-ON" using the scan tool (M.U.T.-IIISE)]
3. OSS-ECU diagnostic trouble code recheck