[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Post-installation operation
  • Liftgate alignment (Refer to .)
Striker removal steps
•Rear end trim (Refer to GROUP 52A - Interior Trims .)
>>B<<1.Striker
Liftgate lock release handle removal steps
•Liftgate trim (Refer to GROUP 52A - Liftgate Trims .)
•Rear wiper motor assembly (Refer to GROUP 51 - Rear Wiper and Washer .)
2.Liftgate lock release handle
Liftgate latch removal steps
•Liftgate trim (Refer to GROUP 52A - Liftgate Trims .)
3.Ground bolt
>>A<<4.Liftgate latch assembly
 
 
INSTALLATION SERVICE POINTS
 
 
>>A<< LIFTGATE LATCH ASSEMBLY INSTALLATION
Install the Liftgate latch assembly mounting bolts in the numerical order.
 

 
 
>>B<< STRIKER INSTALLATION
Install the striker so that the striker center does not deviate more than ±1.5 mm(0.06 in) from the latch center.