STEP 1. Check whether the DTC is set again.
Check again if the DTC is set.(1) | caution | To prevent damage to scan tool (M.U.T.-IIISE), always turn off the power supply mode of the electric motor switch before connecting or disconnecting scan tool (M.U.T.-IIISE). |
Connect scan tool (M.U.T.-IIISE). Refer to "How to connect the Scan Tool (M.U.T.-IIISE)
."
(2) Turn off the power supply mode of the electric motor switch.
(3) Turn on the power supply mode of the electric motor switch.
(4) Check if the DTC is set.
Is DTC No. C1607 set?
Replace the electric parking brake ECU (Refer to ).
The trouble can be an intermittent malfunction (GROUP 00 - How to use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction ). ![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)