36-DATA LIST REFERENCE TABLE

DATA LIST REFERENCE TABLE

The following items can be read by the scan tool (M.U.T.-IIISE) from the electric parking brake ECU input data.

The system is normal.

Item No.	Check item	Check condition		Normal condition
1	Ignition switch	Power supply mode of the electric motor switch: ON		ON
1	Ignition switch	Power supply mode of the electric motor switch: OFF		OFF
2	EPB switch: LOCK 1 SW	Turn on the power supply mode of the electric motor switch, and depress the brake pedal.	Pull up the electric parking brake switch to apply the parking brake.	ON
2	EPB switch: LOCK 1 SW		Do not operate the electric parking brake switch. Push down the electric parking brake switch to release the parking brake.	OFF
3	EPB switch: LOCK 2 SW	Turn on the power supply mode of the electric motor switch, and depress the brake pedal.	Pull up the electric parking brake switch to apply the parking brake.	ON
3	EPB switch: LOCK 2 SW		Do not operate the electric parking brake switch. Push down the electric parking brake switch to release the parking brake.	OFF
4	EPB switch: RELEASE 1 SW	Turn on the power supply mode of the electric motor switch, and depress the brake pedal.	Push down the electric parking brake switch to release the parking brake.	ON
4	EPB switch: RELEASE 1 SW		Do not operate the electric parking brake switch. Pull up the electric parking brake switch to apply the parking brake.	OFF
5	EPB switch: RELEASE 2 SW	Turn on the power supply mode of the electric motor switch, and depress the brake pedal.	Push down the electric parking brake switch to release the parking brake.	ON
5	EPB switch: RELEASE 2 SW		Do not operate the electric parking brake switch. Pull up the electric parking brake switch to apply the parking brake.	OFF
7	Auto hold switch	Brake auto hold switch: ON		ON
7	Auto hold switch	Brake auto hold switch: OFF		OFF
10	Right actuator +B line status	Power supply mode of the electric motor switch is turned on.		Open, Normal
13	Left actuator +B line status	Power supply mode of the electric motor switch is turned on.		Open, Normal
16	Right motor current (adjusted)	Power supply mode of the electric motor switch: ON Electric parking brake: Release		0 A
19	Left motor current (adjusted)	Power supply mode of the electric motor switch: ON Electric parking brake: Release		0 A
37	Right actuator status	-		Displays the electric parking brake actuator (RH) status.
38	Left actuator status	-		Displays the electric parking brake actuator (LH) status.
49	EPB active indicator	The brake warning light is ON.		ON
49	EPB active indicator	The brake warning light is OFF.		OFF
50	EPB warning light	The electric parking brake warning light is ON.		ON
50	EPB warning light	The electric parking brake warning light is OFF.		OFF
51	EPB switch indicator	The electric parking brake switch indicator is ON.		ON
51	EPB switch indicator	The electric parking brake switch indicator is OFF.		OFF
52	FR wheel speed	Perform a test run of the vehicle.		The speedometer display and the scan tool (M.U.T.-IIISE) display almost agree with each other.
53	FL wheel speed
54	RR wheel speed
55	RL wheel speed
56	Estimated vehicle speed	Perform a test run of the vehicle.		The speedometer display and the scan tool (M.U.T.-IIISE) display almost agree with each other.
57	Longitudinal G	Vehicle stopped (level)		-0.39 to 0.39 m/s²
57	Longitudinal G	Running		-9.8 to 9.8 m/s²
58	Shift information	Power supply mode of the electric motor switch: ON	Selector lever position: P	P
			Selector lever position: R	R
			Selector lever position: N	N
			Selector lever position: D	D
59	Engine torque (except PHEV)	Not used.
60	Engine speed (except PHEV)	Not used.
61	Motor torque (PHEV)	The accelerator pedal is depressed with the electric motor running.		Displays the motor torque.
62	PHEV-ECU operation mode (PHEV)	Displayed which operation mode the PHEV-ECU is at.		IG-OFF, Reset, High voltage ON, Torque control, High voltage OFF, Charge control, F-ROM writing
63	Accelerator pedal position	The accelerator pedal is depressed with the electric motor running.		Displays the accelerator pedal opening angle.
64	Master cylinder pressure sensor	The brake pedal is depressed with the electric motor running.		Displayed value changes in accordance with the brake pedal depression.
65	Driver's seat belt	Seat belt (driver's side): Fastened		Fastened
65	Driver's seat belt	Seat belt (driver's side): Unfastened		Not fastened
66	Ignition position information	Not used.
67	Auto hold status	Power supply mode of the electric motor switch: ON Brake auto hold switch: OFF		OFF
67	Auto hold status	Power supply mode of the electric motor switch: ON Brake auto hold switch: ON		Standby or Active
68	Auto hold switch indicator	Brake auto hold switch indicator: ON		ON
68	Auto hold switch indicator	Brake auto hold switch indicator: OFF		OFF
69	A.S.C. dynamic brake fail	Power supply mode of the electric motor switch: ON Emergency brake (ASC): Enabled		Normal
69	A.S.C. dynamic brake fail	Power supply mode of the electric motor switch: ON Emergency brake (ASC): Disabled		Fail
70	Actuator fail A	Power supply mode of the electric motor switch: ON		Normal
71	Actuator fail B	Power supply mode of the electric motor switch: ON		Normal
77	Parking brake status	The electric parking brake is OFF (being released).		Release
		The electric parking brake is ON (being applied).		Lock
		The maintenance mode is entered.		Imperfect lock
		The electric parking brake is applied.		Release -> Lock
		The electric parking brake is released.		Lock -> Release
		The electric parking brake ECU activates the emergency brake.		EPB dynamic BRK
		The ASC-ECU activates the emergency brake.		ASC dynamic BRK
78	RR wheel actuator current	Power supply mode of the electric motor switch: ON Electric parking brake: Release		0 A
79	RL wheel actuator current	Power supply mode of the electric motor switch: ON Electric parking brake: Release		0 A
80	Coding counter	-		-

note	While electric parking brake ECU is disabled by the diagnostic function, the scan tool (M.U.T.-IIISE) displayed data is different from the actual measurement.