[Previous][Next]
REMOVAL AND INSTALLATION <REAR>
cautionThe vehicle speed detection encoder collects any metallic particle easily, because it is magnetized. Make sure that the encoder should not collect any metallic particle. Check that there is not any trouble prior to reassembling it.
 
 
Pre-removal and post-installation operation
Quarter trim removal and installation (Refer to GROUP 52A - Trim ).
Removal steps
>>B<<1.Rear wheel speed sensor and trailing arm assembly connection
>>A<<2.Rear wheel speed sensor grommet
3.Rear wheel speed sensor connector
4.Rear wheel speed sensor
noteThe vehicle speed detection encoder is integrated with the rear hub assembly, which cannot be disassembled.
 
 
INSTALLATION SERVICE POINTS
 
 
>>A<< REAR WHEEL SPEED SENSOR GROMMET INSTALLATION
Install the rear wheel speed sensor grommet to the body panel snugly as shown in the figure.
 
 
 
>>B<< REAR WHEEL SPEED SENSOR INSTALLATION
Push the rear wheel speed sensor to the end and install it securely.