[Previous][Next]
REMOVAL AND INSTALLATION
warningBe very careful because the brake electric vacuum pump may be very hot.
Removal steps
Brake electric vacuum pump relay connector connection
1.Brake electric vacuum pump relay box and brake electric vacuum pump relay box upper cover
2.Brake electric vacuum pump relay box
3.Brake electric vacuum pump relay box upper cover
4.Hose clip
>>A<<5.Vacuum hose connection
Brake electric vacuum pump assembly connector connection
<<A>>6.Brake electric vacuum pump assembly and brake electric vacuum pump assembly mounting bracket
7.Brake electric vacuum pump assembly
8.Brake electric vacuum pump assembly mounting bracket
 
 
REMOVAL SERVICE POINT
 
 
<<A>> BRAKE ELECTRIC VACUUM PUMP ASSEMBLY AND BRAKE ELECTRIC VACUUM PUMP ASSEMBLY MOUNTING BRACKET REMOVAL
Prior to removal, wrap an adhesive tape around the bracket as shown so that the wiring harness and the pump do not interfere with the bracket
 
 
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< VACUUM HOSE INSTALLATION
Align the mark on the vacuum hose with the projection on the vacuum pump fitting. Then insert the hose securely and secure the hose clip.