REGENERATIVE BRAKING LEVEL SELECTOR (PADDLE TYPE) CHECK
1.
Check the continuity between the regenerative braking level selector connector terminals.
Standard value:
Regenerative braking level selector
Terminal number
Resistance value
Upshift and hold the lever.
3 - 2
Continuity exists (2 Ω or less).
Downshift and hold the lever.
1 - 2
No operation
No continuity between the terminals.
2.
In the cases other than the above, replace the regenerative braking level selector.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)